Go to linksys.com -> Support -> Enter your wireless router model number (for example, WRT54GS) -> Click on ‘Get Downloads’ -> Select Version number for your wireless router -> Click on the download link under firmware section, which typically shows the following information. Direct Download link for : WRT54GS firmware.

How old is WRT54G?

The original WRT54G was first released in December 2002. It has a 4+1 port network switch (the Internet/WAN port is part of the same internal network switch, but on a different VLAN).

How do I setup my Linksys wrt54gl router as an access point?

1. Plug your laptop or computer directly to the WRT54GS using an Ethernet cable.
2. Log in to the WRT54GS management interface by opening a Web browser and typing “192.168.
3. Click on the “Setup” tab and give the WRT54GS an IP address within the same subnet as your first wireless access point.

How do I update my Linksys wireless router?

1. Log in to your Linksys server account.
2. Under the Firmware Update section under the Basic tab, click Check for Updates.
3. Once the router detects a firmware update, you will be able to download and install the firmware on your device.
4. On the Update firmware pop-up box, click Yes.
5. A Router Reboot screen will pop up.

How do I access my Linksys wireless G access point?

Connecting an access point to a Linksys wireless router

1. Open the access point’s web-based setup page by entering the default IP Address “192.168.
2. On the web-based setup page, click on Wireless.
3. Enter the Network Name (SSID).
4. Click Wireless Security and select your desired Security Mode.

How do I access my Linksys wireless G router?

Go to the Address bar and enter your router’s IP Address (“192.168. 1.1” is the default IP of most Linksys routers) then press [Enter]. NOTE: If the IP address of the router has been changed, type the router’s IP address in the Address bar instead.

How do I make my Linksys WRT54GL a repeater?

You can turn the Linksys WRT54GS router into a repeater bridge by resetting the router, updating the firmware, setting a static IP address on your computer, changing the router settings then resetting the computer IP address. This task can be complex and time-consuming; only advanced users should try it.

What is default password for Linksys WRT54GL routers?

For all versions of the Linksys WRT54G router, the default password is admin. The password is case sensitive, so it must be written exactly like that. The default IP address is 192.168.1.1.

Is the Linksys WRT54G obsolete?

This Linksys WRT54G was one of the best pieces of computer hardware of its day. But depending what you ask of it today, it can feel obsolete. Remember, when the Linksys WRT54G came out way back in 2002, it was pretty unusual for a household to have much more than a desktop and a laptop, and not all game consoles had network adapters standard.

What does a Linksys wireless router do?

Some attach it directly to their computer, while others use a wireless network card to use the internet without using any cords or wires. In the majority of cases users chose a Linksys router to meet their needs. Linksys is the primary maker of routers used by a number of the current internet service providers .