1. Step 1: Determine the Number of Beams. The first thing I did was decide how many beams I wanted, and this was really determined by the length of the room.
2. Step 2: Find the Ceiling Joists.
3. Step 3: Attach 2×6 Boards to the Ceiling.
4. Step 4: Build the Box Beams.
5. Step 5: Stain the Beams.
6. Step 6: Install the Box Beams.

What is a box beam in construction?

Box beams are beams that are created using sections of lumber, along with plywood sheets. Unlike a solid beam, a box beam is hollow on the inside. This often means that the box girder or beam is not necessarily as sturdy as a solid beam composed of wood or metal. Creating a box beam is a relatively simple task.

What are box beams?

Box Beams. “Box Beams” are Hollow, Real-Wood beams that are much lighter in weight and easier to install than standard, solid beams. These hollow wooden beams can be used to cover up electrical wiring or plumbing in an elegant way, or can simply serve as a beautiful, natural accent to any home.

How do you attach a wood beam to a ceiling?

Measure and mark the ceiling where you intend to install the beams. Stretch a chalk line across the ceiling and snap it to keep lines even and to mark the necessary grids. Install “nailers” on the ceiling to make installing the faux wood beams easier. Nailers are thin strips of wood that the beam will fit over snugly.

How do you install wood beams on the ceiling?

What is a boxbox beam ceiling?

Box beam ceilings are often seen in kitchens and this example shows why it is an excellent idea. Here the beams add movement to the space. The eye follows the beams running the width of the room and down to the view, as the beams line up with the frame of the french doors.

How hard is it to construct a box beam?

Constructing the center box beam on our pitched ceiling was actual the easiest of the 3. We only had to accommodate for irregularities in the ceiling here. The two box beams on the side walls were much harder to avoid gaps between the walls, ceiling, and beams because of irregulars that exist in both the ceiling and the wall.

How do you nail a box beam to the ceiling?

Take the third plank and nail it to the other side at a 90 degree to create a “U” shape. A plank will be nailed into the center of the ceiling after the center has been located using a laser sight. The box beam will then be attached to the ceiling, with the open side facing towards the plank in the ceiling.

How do you make ceiling beams seamless?

Caulk the sides where the beams meet the walls and ceilings and use stainable wood filler to fill all of the nail holes. These last steps will make the beams appear seamless. What was before just a pitched ceiling is now an architectural feature of the space.