Turn the filter cap counterclockwise in a slow motion. Let the water drain out of the filter and pull the filter out of the Kenmore HE2 Plus washing machine. Clean out the filter with water and a clean cloth. Inspect inside the filter housing for debris and wipe the filter housing clean.

How do you clean a Kenmore He2 washer?

Begin procedure

1. Open the washer door and remove any clothing or items from.
2. Be sure the door is closed.
3. Open the dispenser drawer and immediately add % cup.
4. Be sure the dispenser drawer Is closed.
5. Select the CLEAN WASHER cycle.
6. Press START.
7. The cycle will determine whether clothing or other items are.

Do Kenmore washers have filters?

To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.

Where is the filter on a top load washer?

Top Load Washer – Lint / Pump Filters

1. There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator.
2. During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.
3. These filters should never require cleaning or replacement.

How do you remove the filter from a Kenmore He2 plus washing machine?

Remove the three screws along the bottom of the front access panel with a screwdriver. Spread towels on the floor in front of the Kenmore HE2 Plus washing machine. Let the water drain out of the filter and pull the filter out of the Kenmore HE2 Plus washing machine.

What is the model number of Kenmore He2 plus?

Kenmore He2 plus Model Number: 8540028 Number of Items: 1 Part Number: 8540028 UNSPSC Code: 40151500

How do you clean the filter on a Kenmore front load washer?

How to Clean a Kenmore Front-Load Washer Filter Unplug the washing machine and turn off the water. Open the small trap door next to the drain hose connection on the back of the washer to gain access to the filter. Clear out any debris and wipe the filter and the surrounding area with a mild detergent.

Where is the drain pump filter on a whirlpool front load washer?

On your front load washer, there is a ‘clean out’ for the Drain Pump Filter on the bottom, front of the machine. This clean out allows for easy access to the drain pump filter and allows easy cleaning of the filter that prevents debris from entering the pump.