Long story short, the latest version of that particular file is formatted correctly but Samsung’s firmware on its Blu-ray players may not have been coded properly to handle something as simple as a blank list. This causes the player’s main software to crash, which in turn makes the device reboot.

How do I fix my Samsung Blu-ray player?

It really is that straightforward.

1. Remove the disc. Press the eject button on the Blu-ray player to open the tray and remove the disc, and then press eject again to close the tray.
2. Reset the player to factory settings.
3. Perform a firmware update.

How do you reset a Samsung Blu-ray player?

How to Reset a Samsung Blu-Ray Player

1. Make sure there is no disc in the player.
2. Press and hold the Eject button on the device for at least 8 seconds.
3. On the screen you will see a message that the device is being reset.
4. The player will automatically power off and reset then it will show the initial setup screen.

Why did my Blu-Ray player stop working?

There are several reasons a disc may not play in the Blu-ray player. A dirty or scratched disc is the most obvious cause, but an incorrect region code or configuration of your home theater system can be the reason as well. Whether you’re having trouble with 4K or 3D, Blu-ray or DVD, there is a fix.

How do I fix my Blu-Ray player?

Power reset the Blu-ray Disc player.

1. Remove the disc from the Blu-ray Disc player.
2. Turn off the Blu-ray Disc player.
3. Unplug the power cord of the Blu-ray Disc player from the electrical outlet.
4. Let the player remain without power for one minute.
5. Plug the power cord back into the electrical outlet.

Why is my Blu-Ray skipping?

Examine the disc for fingerprints, smudges, or scratches. Use a soft, dry cloth to clean the disc. Re-insert the disc into the Blu-ray Disc player and begin playback. If the issue still occurs, check to see if there are any firmware updates for the Blu-ray Disc player.

Why does my Blu-Ray player keep cutting out?

When playing a disc in the Blu-ray Disc® player, there may be a problem with the disc or the unit may need an update. Re-insert the disc into the Blu-ray Disc player and begin playback. If the issue still occurs, check to see if there are any firmware updates for the Blu-ray Disc player.

What does Prot mean on Samsung DVD player?

protection mode
darren, The prot means it goes into protection mode and shuts itself down to prevent any further damage. It is possible that your DVD player has detected a problem in the amplifier section and is shutting down to prevent further damage.

How do I update the software on my Samsung Blu-ray player?

Software Update

1. From the Home screen, navigate to and select Settings.
2. The Settings menu screen appears. Select Support.
3. Select Software Update.
4. Select Update Now.
5. The Blu-ray player will begin updating the software momentarily.
6. You have completed the steps.

How do I troubleshoot the Samsung bd-f5700?

This troubleshooting page will help you diagnose problems with the Samsung BD-F5700. You cannot open or close the tray because it is stuck. Your tray may have become locked due to a software malfunction. To unlock the tray, press the stop button on the front of the device to put it in a suspended state, and then press 4-8-7-2-3 on the remote.

Are there problems with the bd-j5700 and ht-j5500w?

Numerous people replied to that post, reporting the same issue, on multiple different models, including the BD-J5700 and HT-J5500W. There were also reports about trouble with users’ home theater systems. One user posted a video of the “reboot loop” that has been taking place.

Why does my Samsung Blu ray player turn on and off?

The issue is that the touch screen panel has failed, and thus causes the Blu Ray Player to cycle on and off. (1) Unplug Samsung Blu Ray player; (2) Remove sidewalls and top cover; (3) Remove front fascia;