2. Press and hold until the connectivity indicator on the soundbar blinks white. Once paired, the bass module emits a tone. The STATUS indicator on the back of the module and on the soundbar glow white.

How do I reset my Bose subwoofer?

Try resetting the bass module by disconnecting power for 30 seconds. Disconnect the power cord from the back of the bass module or from the power outlet. Wait 30 seconds, then reconnect power and try again.

Can I use Bose Acoustimass work with any receiver?

A: Glancing at the specifications of the Bose Acoustimass 10, the system is stated to be compatible with A/V receivers and amplifiers rated from 10-200 watts per channel, and from 4 ohms to 8 ohms. Obviously if you want a receiver with bells and whistles like built in WiFi, you’ll need to spend more than bottom dollar.

Can I use Bose cube speakers with any receiver?

Bose Cube Speakers can be used with any type of receiver. In fact, with no built-in module to power them, they were designed to be used with other receivers. You will want to find a receiver that matches the quality of your Bose Cube Speakers to get the highest functionality from the speaker system.

What is the difference between the Bose Acoustimass 6 and 10?

Français Español English ETTING Before you begin We appreciate your choice of the Bose ® Acoustimass ® 6 Series III or Acoustimass 10 Series IV home entertainment speaker system. The Acoustimass 6 features five small cube speakers, while the Acoustimass 10 system features four cube speaker arrays and a center front speaker.

Are the Acoustimass speakers compatible with digital surround sound receivers?

Français Español English SING YSTEM Setting your digital surround sound receiver 6 Series III or Acoustimass 10 Series IV system are fully ! ® Speakers in your Acoustimass compatible with the audio output of digital surround receivers. The system’s integrated signal processing supports full low-frequency reproduction from all channels.

How do I connect my Acoustimass module to my Receiver?

Unlike the speaker cables, this input cable has a multi-pin connector that inserts into the Audio Input jack on the module (Figure 6). When all the connections check out, plug the power cord from the Acoustimass module into an AC (mains) outlet. Plug in the receiver also.