Bathtub Drains and Tub Drain Parts

• Universal Tub Drain. Trim Kits.
• Push Pull Drain Assemblies.
• Push Pull Replacement Stoppers.
• Foot Actuated Replacement Stoppers.
• Strainer Bodies.
• Bushings For Drain Body.
• Metal Overflow. Plates & Screws.
• Trip Lever Waste & Overflow Assemblies.

How do you remove a Moen pop-up bathtub stopper?

Unscrew the knob counterclockwise while holding down the body. If the stopper is stubborn, wrap an old rag around the stopper and use pliers to remove the knob. Remove the brass insert post in the middle of the stopper with a flathead screwdriver, turning counterclockwise. Lift the stopper from the strainer.

How do I remove my tub drain?

Instructions

1. Remove the Tub Stopper or Screen. Remove the drain stopper or screen to gain access to the tub’s drain fitting.
2. Remove the Drain With a Plug Wrench.
3. Remove the Drain With Locking Pliers.
4. Clean the Drain Opening.

What is the metal piece in the tub?

That is the tub drain overflow plate, though it’s actually above the drain, not the faucet. (The opening in this plate leads to a tube that prevents the tub from overflowing by allowing water to run out even if the drain in the bottom of the tub is stopped.)

What are the parts of a tub?

Here are all the parts of a bathtub:

• Water Supply.
• Shower.
• Tub.
• Shuttoff Valves.
• Diverter Pipe.
• Planar Cross.
• Rim.
• Drain.

How do you remove a push down tub drain?

How to Remove a Push-Pull Drain Stopper: Set the drain to its open position. Lift up on the drain stopper’s knob and turn it counterclockwise. After enough turns, the drain stopper should be unscrewed and come free from the drain opening.

What is Moen faucet warranty?

For Faucet products, Moen warrants to the original consumers that, should there be any leak or drip during the 5-year warranty period (effective from date as shown on the purchaser’s original receipt), then Moen shall free of charge provide the necessary parts to put the product back in good working condition.

How do I repair a Moen bathroom faucet?

Twist the spanner cap over the old cartridge to work it free, and put the new cartridge in its place. Before reassembling the fixture, clear away any mineral deposits on the old parts using a solution of vinegar and water. Follow the above steps in reverse to put the faucet back together, and turn on the water supply.

How do you use the Moen faucet repair cartridge?

Place the repair cartridge into the valve so that the ears align with the retaining clip notch. Place the washer over the cartridge, and reinstall the retaining clip. Then replace the handle of the faucet, and tighten the screws.

How to install Moen bathroom sink faucet?

1 Choose the Right Faucet. Before installing a bath faucet,find the right one for you and your needs.